Start here if you are finding your OpenMRS v3 system (aka O3, 3.x) is slower than expected. For instance, if you are finding that the OpenMRS User Interface is slow to load, this list will help you troubleshoot.
If after checking all these things you still have performance challenges: Please let us know! Post some information about your challenges on the OpenMRS Community Forum at https://talk.openmrs.org and please use the Performance Problem Reporting Template at the end of this document to help our community understand your situation.
Check your Version of OpenMRS ESM-Core.
Very early adopters of OpenMRS v3 (O3) may still be on esm-core v4. Version 5 of esm-core includes substantial performance improvements (e.g. over 3x faster loading speed). More information and a migration guide is available here: https://o3-docs.openmrs.org/docs/migrate-to-core-v5.en-US#introduction
Tip: To check the versions of Frontend and Backend Modules you are running in your OpenMRS system, you or your Administrator can use the Implementer Tools to check the version numbers. This list shows the frontend modules introduced by esm-core. In the screenshot below, you can see that this system is using esm-core v5, because esm-primary-navigation app is one of the esm-core modules.
Check your Internet or Intranet Connection
If your implementation is not just deployed on a single local machine, then sometimes slowness is caused by your network speeds. You can easily check your browser speeds by using tools like Chrome’s Internet Speed Test.
Tip: For normal OpenMRS performance, you should have a minimum of ___ MBS Up, and ____ MBS Down.
Check your Hyperlink Redirect
Some distributions find that the landing page seems to get stuck infinitely loading. If this is your problem, confirm that your landing page hyperlink has been set up as-expected. This is usually defined at the distro level as an Ngnix configuration: see example here.
Example Scenarios:
If a user is already logged in, o3.openmrs.org is set to auto-route to https://o3.openmrs.org/openmrs/spa/home
One distribution was only set to auto route to: yourdistro.com/openmrs/spa when it should have been to yourdistro.com/spa/dashboard/home.
Check your Device Specifications.
Sometimes the problem is the hardware itself. If there is a specific type or model of device struggling in your implementations, go to the Device Settings → System Information and take note of the following:
Device Type: Desktop/Laptop/Tablet (if Tablet, please include screen size, e.g. 8”)
Operating System and Version Number: ________
Processor: ____
Installed Memory (RAM): _____ Available Memory: ____
Hard Disk Size: _____
Compare this to the Minimum Hardware Specifications for OpenMRS 3.
Performance Problem Reporting Template
If after checking all these things you still have performance challenges: Please let us know! Post some information about your challenges on the OpenMRS Community Forum at https://talk.openmrs.org and please use the Performance Problem Reporting Template below to help our community understand your situation.
Performance Problem Reporting Template
We are running version ___ of esm-core.
We have checked the internet connection speeds and found ___ MBS up and ___ MBS down.
We are noticing this issue on the following devices: [insert hardware specifications]
Any other details you have noticed, including reproduction steps
E.g. If the slowness is specific to one page: “We have noticed the slowness mainly happens on these pages: [list of pages where you see the slowness, if any in particular]”